Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
ACL Finder
Extreme Networks EAS 100-24t Switch Software Manual
155
Click Apply to display the following Access Rule List window:
To view the configurations for a previously configured rule, click on the corresponding Show Details
button, which will display the following Access Rule Detail Information window:
ACL Finder
This window is used to help find a previously configured ACL entry.
To open this window, click ACL > ACL Finder
Replace DSCP Select this option to instruct the Switch to replace the DSCP value (in a
packet that meets the selected criteria) with the value entered in the adjacent
field.
Counter Enable or disable the counter for this ACL rule.
Ports Enter a range of ports to be configured.
Parameters Description