Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Chapter 4: Quality of Service (QoS)
Extreme Networks EAS 100-24t Switch Software Manual
102
DSCP Mapping
This window is used to set up DSCP Mapping.
To view this window, click QoS > DSCP Mapping:
In this window, the following parameters can be configured:
Click on the Apply button to accept the changes made.
Parameter Description
DSCP Value This field is used to enter a DSCP value in the space provided, which will
instruct the Switch to examine the DiffServ Code part of each packet header
and use this as the main, or part of, the criterion for forwarding. The user may
choose a value between 0 and 63.
Class ID This field is used to enter a Class ID between Class-0 and Class-3.