Installation manual

Chapter 1: Introduction
Extreme Networks EAS 100-24t Switch Hardware Installation Manual
12
NOTE
The SFP combo ports on the switch cannot be used simultaneously with the corresponding 1000BASE-T
ports. If both ports are in use at the same time (ex. port 21 of the SFP and port 21 of the 1000BASE-T), the SFP
ports will take priority over the combo ports and render the 1000BASE-T ports inoperable.
LED Indicators
The switch supports LED indicators for Power, Console, and Link/Act/Speed. The following shows the
LED indicators for the three switches along with an explanation of each indicator.
Figure 1: LED Indicators on EAS 100-24t Switch
Per Device:
EAS 100-24t (LED Per 10/100/1000 Mbps Port):
LED Indicator Color Status Description
Power Green Solid Light Power ON
Light off Power OFF
Console Green Solid Light Console on
Light off Console off
LED Indicator Color Status Description
Link/Act/Speed Green/
Orange
Solid Green When there is a secure 1000Mbps Ethernet connection
(or link) at any of the ports.
Blinking Green When there is reception or transmission (i.e. Activity—
Act) of data occurring at a Fast Ethernet connected
port.
Solid Orange When there is a secure 10/100Mbps Ethernet
connection (or link) at any of the ports.
Blinking Orange When there is reception or transmission (i.e. Activity—
Act) of data occurring at an Ethernet connected port.
Light off No link.