Installation guide

50 Consolidated "e" Series Hardware Installation Guide
Summit 300 Switch Overview
Figure 9: Summit 300-24 switch front view
Summit 300-24 Switch LEDs
The light emitting diode (LED) behavior on the Summit 300-24 is described in Table 10.
Table 10: Summit 300-24 switch LED behavior (continued)
Unit Status LED (MGMT LED)
Color Indicates
Green, solid
Green, blinking
Amber,
blinking
Off
The Summit switch is operating normally.
The Summit switch POST is in progress.
The Summit switch has failed its POST or an overheat condition
is detected.
There is no power.
Fan LED
Color Indicates
Green, solid
Amber,
blinking
Off
All fans are operating normally.
One or more fans has failed. The switch continues to operate
unless over-heating occurs.
The Summit switch has no power.
Power Supply LEDs
PSU-I Color Indicates
Green, solid
Amber,
blinking
Off
The internal power supply is operating normally.
The internal power supply has failed, or the AC connector is not
plugged-in. If the power supply has failed, replace the internal
power supply as soon as possible.
The internal power supply has no power.
PSU-E Color Indicates
Green, solid
Amber,
blinking
Off
The external power supply is operating normally.
The external power supply has failed, or the AC connector is not
plugged-in.
The external power supply is not connected.
RVN24001A
10/100 Mbps ports
Console
port
Mini-GBIC
port status LEDs
Management
LED
PSU LEDs
Fan LED
Mini-GBIC/
1000-baseX ports
10/100/1000-baseT ports