Installation guide

Summit 200 Series Switches
Consolidated "e" Series Hardware Installation Guide 43
Power Socket
The Summit 200 switch automatically adjusts to the supply voltage. The power supply operates down
to 90 V.
Serial Number
Use this serial number for fault-reporting purposes.
MAC Address
This label shows the unique Ethernet MAC address assigned to this device.
NOTE
The Summit 200 switch certification and safety label is located on the bottom of the switch.
NOTE
See “Evaluating and Meeting Mini-GBIC Requirements” on page 31 for mini-GBIC types and distances.
Summit 200 Switch LEDs
Table 9 describes the light emitting diode (LED) behavior for both models of the Summit 200 switch.
Table 9: Summit 200 switch LED behavior
Unit Status LED (MGMT LED)
Color Indicates
Green solid
Green blinking
Amber
Off
The Summit switch is operating normally.
The Summit switch POST is in progress.
The Summit switch has failed its POST or an overheat condition
is detected.
There is no power.
Fan Status LED
Color Indicates
Green
Amber blinking
The fan is operating normally.
A failed condition is present on the fan.
Port Status LEDs
Color Indicates
Green
Green blinking
Off
Link is present; port is enabled.
Link is present, port is enabled, and there is activity on the port.
Link is not present or the port is disabled.