Installation guide

Summit “e” Series and Models
Consolidated "e" Series Hardware Installation Guide 17
Software Features
The software features of the Summit 400-48t include:
• Virtual local area networks (VLANs) including support for IEEE 802.1Q and IEEE 802.1p
• VLAN aggregation
• Spanning Tree Protocol (STP) (IEEE 802.1D)
• Rapid Spanning Tree Protocol (IEEE 802.1W)
• Quality of Service (QoS) including support for IEEE 802.1P, MAC QoS, and eight hardware queues
• Policy-Based Quality of Service (PB-QoS)
• Wire-speed Internet Protocol (IP) routing
• Extreme Standby Router Protocol (ESRP)
• Virtual Router Redundancy Protocol (VRRP)
• Ethernet Automated Protection Switching (EAPS) support (RFC 3619)
• Simple Network Time Protocol (SNTP)
• Jumbo frame support
• DHCP/BOOTP Relay
• Routing Information Protocol (RIP) version 1 and RIP version 2
• Open Shortest Path First (OSPF) routing protocol
• Wire-speed IP multicast routing support
• Diffserv support
• Access-policy support for routing protocols
• Access list support for packet filtering
• Access list support for rate-limiting
• IGMP snooping to control IP multicast traffic
• Protocol Independent Multicast-Sparse Mode (PIM-SM)
• Load sharing on multiple ports
• Dynamic load sharing on multiple ports
• RADIUS client and per-command authentication support
• TACACS+ support
• Console command line interface (CLI) connection
• Telnet CLI connection
• SSH2 connection
• ExtremeWare Vista Web-based management interface
• Simple Network Management Protocol (SNMP) support
• Remote Monitoring (RMON)
• Traffic mirroring for ports by port number
• Network Login—Web
• Network Login—IEEE 802.1X