Installation guide

Consolidated "e" Series Hardware Installation Guide 103
B “e” Series Technical Specifications
This appendix describes the hardware technical specifications for “e” series of Extreme Network
switches. The appendix is organized into the following sections:
• Common Switch Specifications on page 103
• Summit 200 Series Switch Specifications on page 105
• Summit 300 Series Switch Specifications on page 106
• Summit 400 Series Switch Specifications on page 107
For information on the software technical specifications including protocols, MIBs, and standards, see
the ExtremeWare Software Users Guide.
Common Switch Specifications
The following technical specifications and certifications are common to all “e” series switches:
Table 21: Common switch specifications
Environmental Requirements
Operating Temperature 0° to 40° C (32° to 104° F)
Storage Temperature -40° to 70° C (-40° to 158° F)
-10° to 70° C (14° to 158° F)
Operating Humidity 10% to 95% relative humidity, noncondensing
Standards: EN60068 to Extreme IEC68 schedule EN 300 019 (Summit
200 and Summit 400)
Safety Certifications
North America UL 60950 3rd Edition, listed (US Safety)
CAN/CSA-C22.2 No. 60950-00 (Canadian Safety)
International CB Scheme
IEC60950:2000 with all country deviations (International
Safety)