Specifications

Open Issues, Known Behaviors, and Resolved Issues
ExtremeXOS 12.5.4 Release Notes
87
Resolved Issues In ExtremeXOS 12.5.4
The following issues were resolved in ExtremeXOS 12.5.4. ExtremeXOS 12.5 includes all fixes up to and
including ExtremeXOS 11.1.4.4, ExtremeXOS 11.2.3.3, ExtremeXOS 11.3.4.5, ExtremeXOS 11.4.4.7,
ExtremeXOS 11.5.2.10, ExtremeXOS 11.6.5.3, ExtremeXOS 12.0.5, ExtremeXOS 12.1.5, ExtremeXOS 12.2.2,
ExtremeXOS 12.3.5, and ExtremeXOS 12.4.4. For information on those fixes, see the release notes for the
specific release.
Table 40: Resolved Issues, Platform-Specific and Feature PDs
PD Number Description
General
PD4-1814536021,
PD4-1741274969
A switch crashes with soc_dma_done_desc in the NVRAM dump.
PD4-1814422340 A static group still exists in an IGMP group after deleting the IGMP static member.
Workaround: If a static IGMP group is configured on a VLAN it is recommended that you
set the IGMP RA receive required off.
PD4-1947340095 DHCP/BOOTP relay does not work properly if iproute mpls-next-hops is enabled because
they are unsupported features.
PD4-2044891026,
PD4-1929587061
The OSPFv3 process crashes with signal 11 after disabling and enabling ports
connected to neighbors.
PD4-2111130305,
PD4-2012411531
BlackDiamond series and Summit family switches do not examine dot1p inner tags with a
LAG.
PD4-2080394824,
PD4-1961884891
A configuration created with UPM in non-persistent mode cannot be made persistent by
issuing CLI configuration commands.
PD4-2034092086 I/O module memory depletion may be seen if UPM is used to install or delete a
configuration whenever a user logs in to or out of a switch usng a network login port.
PD4-2034092051 A system crash may be seen in switches using UPM to trigger a set of configurations
whenever a user is successfully authenticated by way of a network login port.
PD4-2087108257,
PD4-1394637671
A switch updates DHCP clients with dhcp-lease-timer instead of netlogin-lease-
timer if the dhcp-lease-timer value is changed.
PD4-2088325260,
PD4-1679877595
UPM execution status is returned as Pass regardless of the status of other commands if
the show command is in the UPM profile.
PD4-2036794013,
PD4-1927210571
A supplicant attached to a network login port on an Extreme switch is not receiving
EAPS FAIL messages if RADIUS is unavailable.
PD4-2028980679,
PD4-1900406099
In a private VLAN, broadcast packets are not forwarded after a network VLAN port is
changed to a shared port.
PD4-1995846206 Network login does not send a trigger to IdMgr in MAC-based re-authentication
scenarios.
PD4-1856038101 A telnet access profile is not retained after running the save and reboot commands.
PD4-1751958424 In CLI scripting, $READ inside a loop is not working and displays the following error:
Incorrect READ syntax Error: Read syntax
PD4-2077574992,
PD4-1244836411
RIP advertises routes for a VLAN even though the VLAN does not have any active ports.
PD4-2033837849,
PD4-1441107715
The FDB process dies with signal 11 when creating a blackhole entry for a MAC address
authenticated by network login.
PD4-2027631773,
PD4-1372389708
Running the upload ip-security dhcp-bindings command fails with the following
error:
Object dhcpBindingsUpload does not support method set.