Specifications

Overview
ExtremeXOS 12.5.4 Release Notes
7
# Add ports to the VLAN
configure vlan v1 add ports 1
configure vlan v2 add ports 2
# Enable ELRP on the create VLANs
enable elrp-client
configure elrp-client periodic v1 ports all interval 5 log
configure elrp-client periodic v2 ports all interval 5 log
# Add the ethertype to the protocol
configure protocol IP add snap 0x00bb
configure protocol decnet add snap 0x00bb
VLANs v1 and v2 can then detect the loop on their respective broadcast domains.
● EPICenter Name Change—EPICenter is now called Ridgeline. Ridgeline is an Extreme Networks-
proprietary graphical user interface (GUI) network management system.
● EXTREME-SYSTEM-MIB Table Addition—The following Table/Group has been added to the EXTREME-
SYSTEM-MIB Table.
- extremeImageTable—This table contains image information for all images installed on the device.
● ExtremeXOS Feature Pack Additions—The following feature packs have been added to Table 143,
ExtremeXOS Feature Pack Features, in Appendix A, of the ExtremeXOS Concepts Guide:
-CNA Feature Pack
- Legacy CLI Feature Pack
-SSH Feature Pack
● Extreme Network Virtualization (XNV) Feature—The XNV feature is updated in this release to allow you
to specify the repository server directory on the FTP server that serves as the repository server. To
specify the repository server directory, enter the following command:
configure vm-tracking repository [primary | secondary] server [<ipaddress> |
<hostname>] {vr <vr-name>} {refresh-interval <seconds>} {path-name <path_name>}
The path_name specifies the path to the repository server files from the FTP server root directory.
The default directory for repository server files is: pub.
To display the configured repository server directory, use the following command:
show vm-tracking repository
Primary VM-Map FTP server:
Server name:
IP address : 10.100.1.200
VR Name : VR-Mgmt
Refresh-interval : 600 seconds
Path Name : pub
Secondary vm-map FTP server: Unconfigured
Last sync : 16:35:15 Last sync server : Primary
Last sync status : Successful
● Identity Management Revision—The following note has been added to Chapter 22, “Identity
Management,” in the ExtremeXOS Concepts Guide:
NOTE
This chapter discusses identity management features that are managed using the switch CLI. Related
features are described in other chapters and in the Ridgeline product documentation. For a description of identity
management that ties all the related components together, see the application note titled Deploying an Identity
Aware Network, which is available from Extreme Networks.