Specifications

ExtremeXOS 12.5.4 Release Notes
69
CHAPTER
3
Open Issues, Known Behaviors,
and Resolved Issues
This chapter describes items needing further clarification and behaviors that might not be intuitive. It
also includes the items that have been resolved.
This chapter contains the following sections:
● Open Issues on page 69
● Known Behaviors on page 85
● Resolved Issues In ExtremeXOS 12.5.4 on page 87
● Resolved Issues in ExtremeXOS 12.5.3 on page 89
● Resolved Issues in ExtremeXOS 12.5.2-patch1-1 on page 92
● Resolved Issues in ExtremeXOS 12.5.2.6 on page 92
● Resolved Issues in ExtremeXOS 12.5.2.5 on page 92
● Resolved Issues in ExtremeXOS 12.5.1 on page 97
Open Issues
Following are the open issues for supported features in ExtremeXOS 12.5.4.
Table 38: Open Issues, Platform-Specific and Feature PDs
PD Number Description
General
PD4-2119506258 Loading a configuration from a script, or pasting a configuration to a telnet session, is not
working for a specific set of PIM commands.
Workaround: Change the order of the configuration so that the configure vlan
<vlan> tag <tag value> command is placed between the configure vlan
<vlan> ipa <ip address> and configure pim add vlan <vlan> sparse
commands.
PD4-2135369483 The extremeCurrentConfigInUse variable returns the wrong value of
factoryDefault(4) regardless of the configuration used to boot the switch.
PD4-2136974279 Deleting the secondary IP address of a VLAN not only disables IP forwarding, you will
not be able to disable IP multicast forwarding.
Workaround: Disable IP multicast forwarding by unconfiguring the primary IP address of
the VLAN.