User guide

MPLS Module Installation and User Guide 4-3

Configuring LDP

This section describes the following tasks:

• Configuring LDP on a VLAN on page 4-6

• Configuring LDP Filters on page 4-6

• Configuring LDP Session Timers on page 4-8

• Restoring LDP Session Timers on page 4-9

• Displaying LDP Peer Information on page 4-9

Commands for LDP

Table 4-1 describes the ExtremeWare commands for configuring and monitoring LDP.

Each command is described in detail in the sections that follow.