User guide

MPLS Module Installation and User Guide 2-7
Inserting and Securing a Module
Figure 2-2: Inserting and securing an MPLS module
When the module is pushed into the chassis slot, the ejector/injector
handles begin pivoting to their closed position.
d Close the ejector/injector handles by pushing them toward the center of the
module.
PoS_
0
MPLS
_
AC IN
DC OUT
50020
POWER
AC IN
DC OUT
50020
POWER
(a) Loosen
captive screws
(b) Pivot
ejector/injector
handles
50015
1234AB5678
50015