Specifications

Clarifications and Known Behaviors
ExtremeWare 7.4.3 Installation and Release Notes 71
Workaround. When changing ISP mode to Campus mode configuration, instead of assigning Campus
mode configuration to the same wireless port, assign Campus mode to a different wireless port.
(PD3-36087982)
Changing Switch Time Resets APs Time Incorrectly
Changing the switch time backwards resets the time on the AP incorrectly. When you run the show
wireless ports
and show wireless ports interface clients detail commands the output
shows the
Last state change field incorrectly.
Workaround. Reset the wireless port so that the AP can get the correct time.
(PD3-30472539)
Wireless Client Sees Wrong Log Message
Wireless clients on A radio show 11930 hours of logged on time when the show wireless ports 1:X
interface 1 clients
command is executed.
00:20:A6:4C:FE:C1 1:44:1 FORWARD WEP128 DOT1X 11930:25:41
This is usually a cosmetic problem. The logged on time shows the correct value after the next RADIUS
timer refresh (PD3-28788118).
TCP/IP Connection is Lost if Internal DHCP is Enabled
The TCP/IP connection between the switch and the AP is lost if internal DHCP is enabled and wireless
Network Login is not configured on the wireless port (PD3-35311601).
Wireless Network Login Displays Incorrect User at Log Out
When a wireless Network Login user logs out using the logout window, the log message displays the
wrong user name (PD3-33544205).
IAPP Does Not Support WPA
IAPP roaming works with the following authentication methods:
• Open WEP
• Shared WEP
• Open MacRadius
• Shared MacRadius
• dot1x
IAPP is not supported for WPA (PD3-29602669).
Logout Window Moves to “Cannot Find Server”
The logout pop-up window moves to the "cannot find server" state after x minutes in Network Login
(PD3-28788428).