Specifications

66 ExtremeWare 7.4.3 Installation and Release Notes
Clarifications, Known Behaviors, and Resolved Issues
(PD3-31673591)
SNMP
MIB Table Becomes Empty When Adding Policy Rules through EPICenter
When adding multiple IP policy rules through EPICenter's Policy Manager, frequently the MIB table
will become empty or partially cleared (only some of the rules will remain), even though no error
message has occurred, and the policy rules are still in place on the switch. When this happens it is no
longer possible to create policies on the switch through EPICenter (PD3-36028540).
lldpLocSysDesc Returns Hex Value (Unreadable Characters)
When querying lldpLocSysDesca a hex value is returned (unreadable characters). Since this object type
is Display String, this object should return a readable string value (PD3-35723021).
lldpStatsRemTablesLastChangeTime Displays Wrong Value
When you query the object lldpStatsRemTablesLastChangeTime through SNMP the wrong value is
displayed (PD3-35723085).
LLDP Enabled Port in LldpLocManAddrTable Object
One entry should be created for each LLDP enabled port in the LldpLocManAddrTable object. When
the MIB table is queried, it returns only the management address of the first enabled LLDP port
(PD3-35774621).
CLI Allows Creation of Duplicate Trap Receivers
The CLI configure snmp add trapreceiver command allows you to configure duplicate trap
receivers with the same port, community string, and trap group without generating an error message
(PD2-118394805).
SNMP Response Time from the Switch is Slow
SNMP response time from the switch is slow when the number of APs configured for the switch is
more than seven. EPICenter polling may result in a SNMP failure since the default setting for SNMP is
5s timeout and 1 retry.
Workaround. Increase the timeout value in SNMP Client Tool. Suggested values for more than seven
APs: timeout: 7 seconds; retry = 2.
(PD3-36087851)
Switch Does Not Log a Message When Using SNMP to Change a Configuration
Currently the switch will not log a message when the configuration is changed using SNMP
(PD3-35398661).