Specifications

ExtremeWare 7.4.3 Installation and Release Notes 5
Contents
Chapter 4 Clarifications, Known Behaviors, and Resolved Issues
Clarifications and Known Behaviors 61
General 61
Downgrading from ExtremeWare 7.4 to ExtremeWare 7.3 or Earlier Causes a Failure 61
Port Sharing Between G24T and G8X I/O Modules is not Working Correctly 62
Some APs Reboot in Heavy Traffic and High RF Interference 62
Enabling HTTP on a Non-SSH ExtremeWare 7.4 Image 62
Upgrading the Switch to ExtremeWare 7.4 from ExtremeWare 7.2 or Earlier 62
Load Sharing Group Cannot be Rate Shaped with Loopback Port 62
CPU DoS Protect and ACL Precedence 62
Alpine 63
EPICenter/SNMP Does not Show Port Display String 63
BlackDiamond 6800 63
BlackDiamond Switch Generates L2 Known Unicast Traffic 63
Summit 200, Summit 300-48, and Summit 400 Switches 63
AP Not Coming Up in Remote Connect 63
Loopback Detect Does Not Work on ExtremeWare 7.4e.1b5 63
Opnext ER XENPAKs Generate an Error Message 63
Bi-Directional Rate Shaping 63
Changing the Configuration of a Loopback Port 63
Bridging 64
Deleting Member VLANs Flushes FDB Entries 64
CLI 64
Configurations are Corrupted When Switch is Rebooted 64
Control Protocols 64
VRRP Backup Does Not Flood Packets 64
EAPS Link Down PDU Not Sent from the Transit Switch After Rebooting 64
Diagnostics 64
Upgrading from ExtremeWare 6.2.2 to ExtremeWare7.x Enables FDB Scan 64
EAPS 65
Flushing Selective FDB Entries is not Working Properly on an EAPS Domain 65
ESRP 65
Rate-shaped ESRP Slave Interface Loses Some of the ESRP Hello Packets 65
PoE 65
Default PoE Algorithm on All Ports is max-class-operator 65
RADIUS 65
Authentication With Secondary Radius Server Fails After Switch Reboot 65
Routing 65
Exported Static Route in ISIS is Advertised After Removing the VLAN and Static Route 65
SNMP 66
MIB Table Becomes Empty When Adding Policy Rules through EPICenter 66
lldpLocSysDesc Returns Hex Value (Unreadable Characters) 66
lldpStatsRemTablesLastChangeTime Displays Wrong Value 66
LLDP Enabled Port in LldpLocManAddrTable Object 66
CLI Allows Creation of Duplicate Trap Receivers 66
SNMP Response Time from the Switch is Slow 66
Switch Does Not Log a Message When Using SNMP to Change a Configuration 66
Extreme Real Time Statistics Does Not Work When There are 24+ Ports 67