Specifications

ExtremeWare 7.4.3 Installation and Release Notes 47
3 Supported Limits
This chapter summarizes the supported limits in ExtremeWare 7.4.
NOTE
ExtremeWare 7.4 supports the “i” series platforms, including the BlackDiamond, Alpine, and Summit “i”
series switches. In addition, ExtremeWare supports the “e” series platforms, including the Summit 200,
Summit 300, and Summit 400 series switches.
This chapter contains the following sections:
• Supported Limits for ExtremeWare “i” Series Switches on page 47.
• Supported Limits for ExtremeWare “e” Series Switches on page 53.
• Stacking Limits for Power over Ethernet on page 56.
Supported Limits for ExtremeWare “i” Series Switches
Table 24 lists the supported limits for the “i” series switches. The contents of this table supersede any
values mentioned in the ExtremeWare 7.4 User Guide.
Table 24: Supported limits for “i” Series Switches
Metric Description Limit
Access List rules Maximum number of Access Lists (best case). 5120
Access List rules—BlackDiamond
6816
Maximum number of BlackDiamond 6816
Access Lists (best case).
3500
Access List rules—Summit Maximum number of Access Lists in which all
rules utilize all available options (worst case).
255
Access List rules—Alpine Maximum number of Access Lists in which all
rules utilize all available options (worst case).
255
Access List rules—BlackDiamond Maximum number of Access Lists in which all
rules utilize all available options (worst case).
255 per I/O module
Access Profiles Maximum number of access profiles per switch. 128
Access Profile entries Maximum number of access profile entries per
switch.
256