Specifications

Supported Hardware
ExtremeWare 7.4.3 Installation and Release Notes 15
NOTE
In addition to the filenames listed in Table 2, v743b5.Wxtr and v743b5.SWxtr are used for upgrading
Summit 200 switches from ExtremeWare 7.1e or ExtremeWare 6.2e.2 versions.
NOTE
The BlackDiamond 6816 requires its own ExtremeWare image. The image that runs on other
BlackDiamond, Alpine, or stackable switches does not support the BlackDiamond 6816.
NOTE
Systems with 128 MB memory should use the v743b5.Bxtr or v743b5.SBxtr image. To determine how
much memory is available, use the
show memory command.
Summit 400-48t v743b5.Cxtr or v743b5.SCxtr s400_boot51.bin
Summit 400-24p v743b5.Cxtr or v743b5.SCxtr s405_boot51.bin
Summit 400-24t v743b5.Cxtr or v743b5.SCxtr s405_boot51.bin
Summit 200-24/48 (see
note)
v743b5.Fxtr or v743b5.SFxtr s200_boot51.bin
Summit 300-24 v743b5.Fxtr or v743b5.SFxtr s200_boot51.bin
Summit 300-48 v743b5.Lxtr or v743b5.SLxtr s300_bs.1.1.0.b2.bin
s300_bl.1.1.0.b2.bin
Summit7i/7iT v743b5.Bxtr or v743b5.SBxtr ngboot8.2.bin/8.2
Summit1i/1iT v743b5.Bxtr or v743b5.SBxtr ngboot8.2.bin/8.2
Summit5i/5iT/5iLX v743b5.Bxtr or v743b5.SBxtr ngboot8.2.bin/8.2
Summit48i v743b5.Bxtr or v743b5.SBxtr ngboot8.2.bin/8.2
Summit48si v743b5.Bxtr or v743b5.SBxtr ngboot8.2.bin/8.2
ARM module v743b5.arm v743b5.nprom/1.18
OC3 PoS module v743b5.oc3 v743b5.nprom/1.18
OC12 PoS module v743b5.oc12 v743b5.nprom/1.18
OC3 ATM module v743b5.atm3 v743b5.nprom/1.18
MPLS module v743b5.mpls v743b5.nprom/1.18
T1 module v743b5.t1 t1boot28.wr/2.8
E1 module v743b5.e1 e1boot28.wr/2.8
T3 module v743b5.t3 t3boot28.wr/2.8
Table 2: Software for supported hardware (continued)
Extreme Hardware ExtremeWare Filename BootROM Filename/Version