Installation guide

1-12 B
LACK
D
IAMOND
H
ARDWARE
I
NSTALLATION
G
UIDE
B
LACK
D
IAMOND
O
VERVIEW
For more information on adding or removing DIMMs, refer to Chapter 3.
MSM LED
S
Table 1-4 describes the LED behavior on the MSM.
I/O M
ODULE
C
ARDS
The BlackDiamond 6800 system has four I/O modules, as follows:
• G4X module
• G6X module
• F32T module
• F32F module
I/O modules can be inserted or de-inserted at any time, without causing disruption of
network services. No configuration information is stored on the I/O module; all
configuration information is stored on the MSM.
When the BlackDiamond 6800 is powered on, the system software generates a default
configuration for any slots that are occupied with I/O modules. The default
configuration allows the I/O module ports to participate in the VLAN default.
Table 1-4:
MSM LEDs
LED Color Indicates
SYS Green (blinking)
Amber (blinking)
Amber
Off
Normal operation
Diagnostic test in progress
Diagnostic failure
No power
MSTR Green
Amber
Master MSM
Slave MSM
ENV Green
Amber
Environment (temperature, fan, power supply) is operating
properly
Environmental failure
ERR Amber
Off
Critical software error logged since power up
Normal operation