User guide

B
LACK
D
IAMOND
U
SER
G
UIDE
2-21
U
SING
SNMP
D
ISPLAYING
SNMP S
ETTINGS
To display the SNMP settings configured on the BlackDiamond, enter the following
command:
show management
This command displays the following information:
• Enable/disable state for telnet, SNMP, and Web access
• SNMP community strings
• Authorized SNMP station list
• SNMP trap receiver list
• Login statistics
config snmp syscontact <string> Configures the name of the system
contact. A maximum of 255 characters is
allowed.
config snmp sysname <string> Configures the name of the system. A
maximum of 255 characters is allowed.
The default sysname is the model name of
the device (for example,
BD6800)
. The
sysname appears in the BlackDiamond
prompt.
config snmp syslocation <string> Configures the location of the system. A
maximum of 255 characters is allowed.
Table 2-7:
SNMP Configuration Commands (continued)
Command Description