User guide

B
LACK
D
IAMOND
U
SER
G
UIDE
2-7
C
OMMON
C
OMMANDS
config vlan <name> ipaddress <ip_address>
{<mask>}
Configures an IP address and subnet
mask for a VLAN.
enable bootp vlan [<name> | all] Enables BOOTP for one or more VLANs.
enable idletimeout Enables a timer that disconnects all
sessions (both Telnet and console) after
20 minutes of inactivity. The default setting
is disabled.
clear session <number> Terminates a Telnet session from the
system.
disable bootp vlan [<name> | all] Disables BOOTP for one or more VLANs.
disable idletimeout Disables the timer that disconnects all
sessions. Once disabled, console sessions
remain open until the system is rebooted.
Telnet sessions remain open until you
close the Telnet client.
disable port [<slot:portlist> | all] Disables a port.
disable telnet Disables Telnet access to the system.
disable web Disables Web access to the system.
delete account <username> Deletes a user account.
delete vlan <name> Deletes a VLAN.
unconfig switch {all} Resets all system parameters (with the
exception of defined user accounts) to the
factory defaults. If you specify the keyword
all
, the user account information is reset
as well.
show banner Displays the user-configured banner.
Table 2-3:
Common Commands (continued)
Command Description