User guide

1-8 B
LACK
D
IAMOND
U
SER
G
UIDE
B
LACK
D
IAMOND
O
VERVIEW
F
ACTORY
D
EFAULTS
Tabl e 1 -1 shows factory defaults for the BlackDiamond features.
Table 1-1:
BlackDiamond Factory Defaults
Item Default Setting
Port status Enabled on all ports
Serial or Telnet user account admin with no password and user with no password
Console port configuration 9600 baud, 8 data bits, 1 stop bit, no parity, XON/XOFF
flow control enabled
Web network management Enabled
SNMP read community string public
SNMP write community string private
RMON history session Enabled
RMON alarms Disabled
BOOTP Enabled on the default VLAN ( default )
QoS All traffic is part of the default queue in ingress mode
QoS monitoring Automatic roving
802.1p priority Recognition enabled
802.3x flow control Enabled on Gigabit Ethernet ports
Virtual LANs One VLAN named default ; all ports belong to the default
VLAN; the default VLAN belongs to the STPD named
s0
802.1Q tagging All packets are untagged on the default VLAN ( default)
Spanning Tree Protocol Disabled for the switch; enabled for each port in the STPD
Forwarding database aging period 300 seconds (5 minutes)
IP Routing Disabled
RIP Disabled
OSPF Disabled
IP multicast routing Disabled
IGMP snooping Enabled
DVMRP Disabled
GVRP Disabled
Port mirroring Disabled