User guide

13-6 B
LACK
D
IAMOND
U
SER
G
UIDE
S
OFTWARE
U
PGRADE AND
B
OOT
O
PTIONS
copy configuration from [msm-a | msm-b] to
[msm-a | msm-b]
Copies the primary and secondary
configuration stored in the onboard FLASH
memory from one MSM to another MSM. To
copy the runtime configuration, use the
save
configuration
command.
reboot {<date> <time> | cancel} Reboots the system at the date and time
specified. If you do not specify a reboot time,
the reboot happens immediately following the
command, and any previously scheduled
reboots are cancelled. To cancel a previously
scheduled reboot, use the
cancel
option.
save {config} {primary | secondary} Saves the current configuration to NVRAM.
You can specify the primary or secondary
configuration area. If not specified, the
configuration is saved to the configuration area
currently in use.
upload config <ipaddress> <filename> {every
<time> | cancel}
Uploads the current runtime configuration to
the specified TFTP server. If
every <time>
is specified, the switch automatically saves the
configuration to the server once per day, at the
specified time. To cancel automatic upload,
use the
cancel
option. If no options are
specified, the current configuration is uploaded
immediately.
use config {primary | secondary} Configures the system to use a particular
configuration on the next reboot. Options
include the primary configuration area, or the
secondary configuration area. If not specified,
the primary configuration area is used.
use image [primary | secondary] Configures the system to use a particular
image on the next reboot.
Table 13-1:
Boot Option Commands (continued)
Command Description