User guide

B
LACK
D
IAMOND
U
SER
G
UIDE
13-5
U
SING
TFTP
TO
D
OWNLOAD THE
C
ONFIGURATION
U
SING
TFTP
TO
D
OWNLOAD THE
C
ONFIGURATION
You can download a previously saved configuration from a TFTP server. To download a
configuration, use the following command:
download config <ipaddress> <filename>
After the ASCII configuration file is downloaded by way of TFTP, you are prompted to
reboot the system. The downloaded configuration file is stored in an area of system
memory, and is not retained if the BlackDiamond has a power failure. When the system
is rebooted, it treats the downloaded configuration file as a script of command-line
interface commands. After the script is executed, you are prompted to save the
configuration.
B
OOT
O
PTION
C
OMMANDS
Table 13-1 lists the commands associated with BlackDiamond boot options.
Table 13-1:
Boot Option Commands
Command Description
show config Displays the current configuration to the
terminal. You can then capture the output and
store it as a file.
download bootrom <ipaddress> <filename> Downloads a BOOT ROM image from a TFTP
server. The downloaded image replaces the
BOOT ROM in the onboard FLASH memory.
download config <ipaddress> <filename> Downloads a previously saved ASCII
configuration file from a specific IP host.
download image [xmodem | <ipaddress>
<filename>] {primary | secondary}
Downloads a new image by way of XMODEM
using the serial port, or from a TFTP server
over then network. If no parameters are
specified, the image is saved to the current
image.
copy image from [msm-a | msm-b] to [msm-a |
msm-b]
Copies the primary and secondary image
stored in the onboard FLASH memory from
one MSM to another MSM.