User guide

B
LACK
D
IAMOND
U
SER
G
UIDE
9-13
D
ISPLAYING
RIP S
ETTINGS
The example in Figure 9-4 is configured as follows:
create vlan Finance
create vlan Personnel
create vlan MyCompany
config Finance protocol ip
config Personnel protocol ip
config Finance add port 1:*,3:*
config Personnel add port 2:*,4:*
config MyCompany add port all
config Finance ipaddress 192.207.35.1
config Personnel ipaddress 192.207.36.1
enable ipforwarding
config rip add vlan all
enable rip
D
ISPLAYING
RIP S
ETTINGS
To display settings for RIP, use the commands listed in Table 9-2.
Table 9-2:
RIP Show Commands
Command Description
show rip {vlan <name> | all} Displays RIP configuration and statistics for
one or more VLANs.
show rip stat {vlan <name> | all} Displays RIP-specific statistics. Statistics
include the following per interface:
■
Packets transmitted
■
Packets received
■
Bad packets received
■
Bad routes received
■
Number of RIP peers
■
Peer information