User guide

7-8 B
LACK
D
IAMOND
U
SER
G
UIDE
Q
UALITY OF
S
ERVICE
(Q
O
S)
Table 7-3 describes the PQM commands.
C
ONFIGURING
Q
O
S
Tabl e 7 -4 describes the commands used to configure QoS.
Table 7-3:
PQM Commands
Command Description
enable qosmonitor {port <slot:portlist>} Enables the QoS monitoring capability.
When no port is specified, the QoS monitor
automatically samples all the ports and
records the sampled results. Error
messages are logged to the syslog if the
traffic exceeds the parameters of the QoS
profile(s). The default setting is disabled.
disable qosmonitor Disables the QoS monitoring capability.
show port {<slot:portlist>} qosmonitor Displays real-time QoS statistics for one or
more ports.
Table 7-4:
QoS Configuration Commands
Command Description
enable pace Enables recognition of the PACE bit.
Available in ingress mode, only.
create qosprofile <qosname> Creates a QoS profile. The default values
assigned to a created QoS profile are
■
Minimum bandwidth — 0%
■
Maximum bandwidth — 100%
■
Priority — low
config qosmode [ingress | egress] Changes the QoS mode to ingress mode
or egress mode.