Installation guide

Technical Specifications

Extreme Networks Pluggable Interface Modules Installation Guide

Table 11 lists the specifications for the ZX SFP interface.

Table 12 lists specifications for the 1000BASE-BX bi-directional SFPs. The 1000BASE-BX SFP modules

conform to the IEEE 802.3ah 1000BASE-BX10 standard.

NOTE

The 1000BX bidirectional SFPs include two SFP optical devices, the 1000BASE-BX-U SFP and the

1000BASE-BX-D SFP, which must be used as a pair to allow for a single fiber bidirectional connection.

Table 13 lists the specifications for the 100FX SFP module for Gigabit Ethernet (GE) ports. The 100FX

SFP for GE ports conforms to the 100FX-MMF standard.

Table 11: ZX SFP Specifications

Parameter Minimum Typical Maximum

Transmitter

Average launch power -2 dBm 0 dBm 3 dBm

Center wavelength 1540 nm 1550 nm 1570 nm

Receiver

Receive sensitivity -23 dBm

Average receive power (max) -3 dBm

Operating wavelength 1540 nm 1550 nm 1570 nm

Table 12: 1000BASE-BX Bi-directional SFP Specifications

Parameter Minimum Typical Maximum

Transmitter

Average launch power -9 dBm -3 dBm

Center wavelength (1000BASE-BX10-D) 1480 nm 1490 nm 1550 nm

Center wavelength (1OOOBASE-BX10-U) 1260 nm 1310 nm 1360 nm

Receiver

Receive sensitivity -19 dBm

Average receive power (max) -3 dBm

Link

Link power budget 8 dB

Table 13: 100FX SFP (GE Ports) Specifications

Parameter Minimum Typical Maximum

Transmitter

Average launch power -20 dBm -14 dBm

Center wavelength 1270 nm 1310 nm 1380 nm

Receiver

Receive sensitivity -31 dBm

Average receive power (max) -14 dBm

Distance range over each fiber type

62.5/125 μm MMF 2 m 2000 m

50/125 μm MMF 2 m 2000 m