Installation guide

Installing an XFP Module
Extreme Networks Pluggable Interface Modules Installation Guide
21
Figure 4: Accessing the XFP Ports
4 Holding the module by its sides, partially insert the XFP module into one of the ports on the Summit
XGM2-2xf option card or the 10G4Xa module (see Figure 5).
5 Push the XFP handle (bail latch) upward until it clicks into place (see Figure 5).
6 Slide the XFP module as far as possible into the slot until you hear it click, indicating that it is firmly
attached (see Figure 5 and Figure 6).
Figure 5: Installing an XFP Module
Figure 6: Installed XFP Module
SH_023
Summit XGM2-2xf
Option Card
XFP Ports
SH_024
XFP Module
XFP Handle
SH_025
Installed
XFP Module
Cover Plate