User's Guide

Once the bracket is secure, youcan install the AP by aligning the red dot on the bracket with the red dot on the bottom of the AP. Keeping the
dots aligned, raise the APup until the bracket fits into the circular depression in the bottom of the AP. When the APis firmly seated, rotate it clock-
wise until it clicks in to place. The process is identical for both models.
Mount the APon a Wall
Use the holes in the accessory wall-mount bracket as a template to markthe wall. Drill holes in the wall and attach the bracket to the wall using
wall screws and wall anchors if necessary. Attach the APto the bracket in the same manner as shown in the previous section. Install external
antennas on AP510CX devices. Order antennas from Extreme Networks (AH-ACC-ANT-AX-KT).
Lock the AP
Youcan secure the AP using a Kensington
®
lock in the lock slot on the side of the device, or you can use a security bracket and a crosshead
AP510C and AP510CX Hardware Guide
4
AP510C and AP510CX Hardware Guide
4
screw or a security screw. Security brackets and screws can be ordered separately from Extreme Networks (not available in Brazil).
Extreme Networks recommends a variety of Kensington locks. For more information, contact your sales representative.