Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: AP460i/e Overview
- 2: Install the Access Point
- AP460i/e Box Contents
- Access Point Mounting Options, Brackets, and Accessories
- Position the Access Point before Installation
- Install the Access Point on a Wall or Flat Surface
- Install the Access Point to a Flat Surface Using KT-147407-02 Flat Part and 1-Axis Tilt Part
- Install the Access Point to a Flat Surface Using the KT-147407-02 Flat Part, 1-axis Tilt Part, and the KT- 150173-01 Extension Arm
- Install the Access Point On a Flat Surface Using the KT-150173-01 Extension Arm
- Install the Access Point on a Flat Surface Using the MBO-ART02 Articulating Mounting Bracket
- Install the Access Point on a Flat Surface Using the WS-MBV-VMM Vehicle Bracket (#32216)
- Install the Access Point on a Pole
- Attaching the access point to a pole using all three KT-147407-02 bracket parts
- Attaching the access point to a pole using the pole part of the KT-147407-02 bracket
- Mounting the access point to a pole using pole part of the KT-147407-02 bracket and the KT-150173-01 extension arm
- Mounting the access point to a pole using the KT-147407-02 bracket parts and the KT-150173-01 extension arm
- Attaching the access point to a pole using the WS-MBO-POLE01 bracket and MBO-ART02 articulating mounting bracket
- 3: Powering method
- 4: GE/Console connections
- 5: Antenna configuration for external antenna model
- 6: Specifications
- 7: Regulatory Information
- Professional Installation Instruction
- Safety Guidelines
- Federal Communications Commission (FCC) Notice
- Industry Canada Notice
- Detachable Antenna Usage
- Australia Notice
- Brazil Anatel Statement
- Hazardous Substances
- Supplement to Product Instructions
- NCC Statement
- CE Information
- European Waste Electrical and Electronic Equipment (WEEE) Notice
- Declaration of Conformity in Languages of the European Community
- Index
•
Two 0.5" wide stainless-steel cable clamps
•
Access point
To install the access point to a pole:
1 Attach the flat part of the KT-147407-02 bracket to the access point. For instruction on how to
attach the bracket parts, see attaching the flat part and the 1-axis tilt part of the KT-147407-02
bracket to the access point.
2 Align the circlular holes on one end of the KT-150173-01 extension arm against the large holes on the
1-axis tilt bracket.
Figure 15: Circular holes on the KT-150173-01 extension arm
Label
Description
A Circular holes on the KT-150173-01 extension arm that
is used to attach to the 1-axis tilt part of the
KT-147407-02 bracket, to attach to the wall, and to
the pole part of the KT-147407-02 bracket.
3 Attach the KT-150173-01 extension arm to the 1-axis tilt bracket by using two hex-head M12 stainless-
steel screws and two hex-head M12 stainless-steel nuts.
4 Attach the pole part of the KT-147407-02 bracket to the other end of the KT-150173-01 extension
arm using two M12 screws and M12 hex-nuts.
5 Insert the 0.5" stainless-steel cable clamps through the long slots on the sides of the KT-147407-02
pole bracket part.
Install the Access Point
ExtremeMobility AP460i/e Outdoor Access Points 26