Installation Guide

Install the Access Point On a Flat Surface Using the KT-150173-01 Extension
Arm
For installation for which you don't want to use the KT-147407-02 brackets, you can attach the access
point to a flat surface using just the KT-150173-01 extension arm.
The following hardware is required:
•
KT-150173-01 extension arm
•
Eight M6 hex-head screws
•
Four M6 hex-head screws to attach one end of the extension arm to the access point
•
Four M6 hex-head screws to attach the other end of the extension arm to the wall
•
Access point
1 Using the KT-150173-01 extension arm as a template, mark and drill four hole centers on a flat
surface.
The holes must be within the semi-circular cuts of the extension arm.
2 Attach one end of the KT-150173-01 extension arm to the access point using four M6 screws.
3 Attach the other end of the KT-150173-01 extension arm to the wall using four M6 hex-head screws.
Use screw-in anchors with the four M6 size hex-head screws to mount the bracket on a wood
surface.
To mount the bracket on a concrete surface, use concrete anchors.
Install the Access Point on a Flat Surface Using the MBO-ART02 Articulating
Mounting Bracket
The following hardware is required:
•
MBO-ART02 articulating mounting bracket
•
Access point
•
Six M6 hex-head screws
•
Two M6 hex-head screws is used for attaching the MBO-ART02 articulating mounting bracket to
the access point
•
Four M6 hex-head screws are used for attaching the MBO-ART02 articulating mounting bracket
to the wall
Install the Access Point
ExtremeMobility AP460i/e Outdoor Access Points 17