User's Guide

Mode Data Rate Power (dBm)
11n HE40
MCS 0 -92
MCS 1 -88
MCS 2 -86
MCS 3 -83
MCS 4 -80
MCS 5 -76
MCS 6 -74
MCS 7 -73
MCS 8 -69
MCS 9 -67
MCS 10 -63
MCS 11 -60
HE80
MCS 0 -88
MCS 1 -85
MCS 2 -83
MCS 3 -80
MCS 4 -77
MCS 5 -73
MCS 6 -71
MCS 7 -69
MCS 8 -66
MCS 9 -64
MCS 10 -60
MCS 11 -57
Device Specifications
l Chassis dimensions: Per hardware spec: 8.07” x 8.07” x 1.46” (205 mm x 205 mm x 37 mm
l Weight: 2.61 lbs (1.18 kilograms) approximate weight
l Antennas: Four dual band and three 5 GHz single band omnidirectional antennas
l Ethernet ports:
l Eth0: autosensing 100/1000G BASE-T/TX Mbps, requiring Cat5 or better cable.
l Eth1: autosensing 10/100/1000G BASE-T/TX Mbps, requiring Cat5 or better cable. The APreceives power through an Ethernet connection to
the ETH1 port from PSE (power sourcing equipment) that is compatible with the 802.3at and 802.3at standards.
l 5.0 BLE
Antenna Gain
l WiFi 2.4 GHz: 3.9 dBi gain max
l WiFi 5 GHz: 4.7 dBi gain max
Antenna Plots
The antenna plots for the AP410C are available below. The Ethernet port location is noted on each chart.
AP410C Hardware Guide
13
AP410C Hardware Guide
13