Specifications

3
WWW.EXTREMENETWORKS.COM
Subject to change until product is released.
Product Specifications
Radio Specifications
Max Users
SSID per Radio/Total: 8/16
Users per Radio/total: 512/1024
802.11a
5.150–5.850 GHz Operating Frequency
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11b
2.4–2.5 GHz Operating Frequency
Direct-Sequence Spread-Spectrum (DSSS) Modulation
Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
802.11g
2.4–2.5 GHz Operating Frequency
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11n
2.4–2.5 GHz and 5.150–5.850 GHz Operating Frequency
802.11n Modulation
HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
HT40 High-Throughput (HT) Support for 5 GHz
A-MPDU and A-MSDU Frame Aggregation
802.11ac
5.150–5.850 GHz Operating Frequency
802.11ac Modulation (256-QAM)
Rates (Mbps): MCS0 – MCS31 (6.5MBps - 600Mbps)
5G: 4x4 Multiple-In, Multiple-Out (MIMO) Radio
2.4G: 2x2 Multiple-In, Multiple-Out (MIMO) Radio
Rates (Mbps): MCS0–MCS9 (6.5Mbps – 3467Mbps), NSS = 1-4.
4x4:4 Stream Multiple-In, Multiple-Out (MIMO) Radio
VHT20/VHT40/VHT80/VHT160 support
TxBF ( Transmit Beamforming)
802.11ax
2.4–2.5 GHz and 5.150–5.850 GHz Operating Frequency
802.11ax Modulation (1024-QAM)
Dual-band OFDMA
Rates (Mbps):
5G: HE0-HE11 (8 Mbps – 4800 Mbps).
2.4G: HE0-HE11 (8Mbps – 574 Mbps).
4x4:4 Stream Multiple-In, Multiple-Out (MIMO) Radio@ 5GHz
2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio @2.4GHz
HE20/HE40/HE80/HE160 support for 5 GHz
HE20/HE40 support for 2.4 GHz
DL SU-MIMO and MU-MIMO
TxBF (Transmit Beamforming)
IOT Radio
BLE 5 Radio Bluetooth® Low Energy (BLE)
Interfaces
(1) 100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45 PoE
(Power over Ethernet 802.3at) Port
(1) 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
USB 2.0, Type A , 5V, 0.9A
Power Specifications
IEEE 802.3at PoE Power
Power Options
Power Draw: Typical: 17.69; Max: 18.74 (w/o USB)
Typical: 22.69; Max: 23.74 (w USB)
802.3at Power over Ethernet (PoE) capable
Gigabit Ethernet port (RJ-45 power input pins:
Wires 4,5,7,8 or 1,2,3,6)
802.3af Power over Ethernet injector
Physical
8" x 8" x 1.8" (205mm x 205mm x 37mm)
AP410C: 2 lbs (.9 kg)
TPM chip
Internal Antennas
(3) Integrated single band, 5.1-5.8 GHz omnidirectional antennas
(2) Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz omnidirectional
(1) Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz omnidirectional for
BLE and WiFi 5G
(1) Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz omnidirectional
for sensor
Mounting
AP support 15/16 flush ceiling tile included in the box
Wall Mount sold as an accessory
Ceiling Tile Recessed 15/16" sold as an accessory
Built-in slot for Kensington type locks
Environmental
Operating: 0 to 40°C
Storage: -40 to 70°C
Humidity: 0% to 95% (non-condensing)
Environmental Compliance
UL2043 - Plenum Rated
Regulatory Compliance
Product Safety Certifications
IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No.60950-1-03
AS/NZS 60950.1,
RoHS Directive 2011/65/EU
Radio Approvals
FCC CFR 47 Part 15, Class B
ICES-003, Class B
FCC Subpart C 15.247
FCC Subpart E 15.407
RSS247
AS/NZS4268 + CISPR32
IEC/EN 60601-1-2
EN 62311
EN 50385
EN 301 489-1
EN 301 489-17
Support
Limited Lifetime Warranty
Wi-Fi Alliance Certifications
Wi-Fi Alliance Certifications
Connectivity
Wi-Fi CERTIFIED 6
Wi-Fi CERTIFIED
a, b, g, n, ac
Access Passpoint
®
Optimization
WMM
®
WMM
®
– Power Save
Wi-Fi Agile Multiband
Security
Protected Management Frames
WPA
– Enterprise, Personal
WPA2
– Enterprise, Personal
WPA3
– Enterprise, Person
AP410C Max Antenna Gain
Software
Mode
Radio 0 Radio 1 Sensor IoT
Fixed Dual
2.4 Ghz
4.0dBi
5 Ghz
4.7dBi
2.4Ghz 3.8dBi 5G:
4.5dBi
3.2dBi
Dual 5G
5 Ghz
4.7dBi
5 Ghz
4.7dBi
2.4Ghz 3.8dBi 5G:
4.5dBi
3.2dBi
EN 55032, (Class B)
EN 55011, (Group 1, Class B)
EN 55024
EN 60601-1-2
EN 61000-3-2
EN 61000-3-3
EN 300 328
EN 301 893
EN 300 440
EN 50581