Specifications

3
WWW.EXTREMENETWORKS.COM
Product Specifications
Radio Specifications
• SSID per Radio/Total: 8/16
• Users per Radio/total: 512/1024
802.11a
• 5.150–5.850 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11b
• 2.4–2.5 GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• Rates (Mbps): 11, 5.5, 2, 1 w/ auto fallback
802.11g
• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11n
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11n Modulation
• Rates (Mbps): MCS0 - MCS15 (6.5MBps - 300Mbps)
• 2x2 Multiple-In, Multiple-Out (MIMO) Radio
• HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
• HT40 High-Throughput (HT) Support for 5 GHz
• A-MPDU and A-MSDU Frame Aggregation
802.11ac
• 5.150–5.850 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0–MCS9 (6.5Mbps – 867Mbps), NSS = 1-2.
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• VHT20/VHT40/VHT80 support
• TxBF ( Transmit Beamforming)
802.11ax
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11ax Modulation (1024-QAM)
• Dual-band OFDMA
• Rates (Mbps):
• 5G: HE0-HE11 (8 Mbps – 1200 Mbps).
• 2.4G: HE0-HE11 (8 Mbps – 574 Mbps).
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• HE20/HE40/HE80 support for 5 GHz
• HE20/HE40 support for 2.4 GHz
• DL SU-MIMO and MU-MIMO
• TxBF (Transmit Beamforming)
Interfaces
• (2) Autosensing 10/100/1000 Ethernet
Power Specifications
• IEEE 802.3af PoE Power
Radios
• BLE Radio Bluetooth® Low Energy (BLE) and IEEE® 802.15.4 compliant
• Internal GPS - accuracy is 2.5m- 3m in open sky
AP360i Peak Gain Chart
Software Mode Radio 1 Radio 2 Radio 3
Dual Band 2.4 Ghz 4.2 dBi 5 Ghz 4.74dBi 4.5 dBi
Sensor on R1
2.4 Ghz 4.2dBi
5 Ghz 4.5dBi
5 Ghz 4.74dBi 4.5 dBi
Dual 5G 5 Ghz 4.5dBi 5 Ghz 4.74dBi 4.5 dBi
Power Options
• Power Draw: Typical: 9.5W
Max: 12.1W
• 802.3af Power over Ethernet (PoE) capable
Gigabit Ethernet port (RJ-45 power input pins:
Wires 4,5,7,8 or 1,2,3,6)
• 802.3af Power over Ethernet injector
Physical
• 7.4" x 5.7" x 1.9" (190mm x 145mm x 50mm)
• AP360i/e: estimate 2.2 lbs (1.0kg)
Antennas
AP360i - Internal Antennas
• (2) Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz
omnidirectional antennas
• (2) Integrated single band, 5.1-5.8 GHz omnidirectional antennas
• (1) Integrated single band, 2.4-2.5 GHz omnidirectional antennas for BLE
AP360e - External Antennas
• (5) Ntype connectors
Mounting
• Pole Mount with 15 degree tilt (sold as an accessory)
• 12" Extension arm (sold as an accessory)
• 10" Extension w/2-axis 80 degree tilt (sold as an accessory)
Environmental
• Operating: - 40°C to 60°C, Storage: -40 to 70 °C
• Humidity: 0% to 95% (non-condensing)
• Wind Rating: 165 Mph sustained winds
• Operational Shock: IEC60721-3-4, Class 4M3; ASTM D3332-99;
MIL STD 810H Method 516; IEC6137 Ed 2, Chapter 10, Category 1,
Class B (Body Mounted)
• Operation Vibration: ASTM D3580-95, IEC60721-3-4,
Class 4M3 (IEC 60068-2-64); IEC61373 Ed. 2, Chapters 8&9, Category 1,
Class B (Body Mounted)
Environmental Discharge
• +/-4 kV (contact discharge)/ +/-8 kV (Air Discharge)
Regulatory Compliance
Product Safety Certifications
• IEC 62368/60950-1, EN 62368/60950-1, USA 62368/60950-1, AS/NZS
62368/60950.1
• RoHS Directive 2011/65/EU
Radio Approvals
• FCC CFR 47 Part 15, Class B
• ICES-003, Class B
• FCC Subpart C 15.247
• FCC Subpart E 15.407
• RSS247
• AS/NZS4268 + CISPR32
• IEC/EN 60601-1-2
• EN 62311
• EN 50385
• EN 301 489-1
• EN 301 489-17
• EN 55032, (Class B)
• EN 55011, (Group 1, Class B)
• EN 55024
• EN 61000-3-2
• EN 61000-3-3
• EN 300 328
• EN 301 893
• EN 50581
• IR2030/8/3
Support
• 1 Year Warranty