Specifications

3
WWW.EXTREMENETWORKS.COM
Product Specifications
Radio Specifications
Max Users
• SSID per Radio/Total: 8/16
• Users per Radio/total: 512/1024
802.11a
• 5.150–5.850 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11b
• 2.4–2.5 GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• Rates (Mbps): 11, 5.5, 2, 1 w/ auto fallback
802.11g
• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11n
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11n Modulation
• Rates (Mbps): MCS0 - MCS15 (6.5MBps - 300Mbps)
• 2x2 Multiple-In, Multiple-Out (MIMO) Radio
• HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
• HT40 High-Throughput (HT) Support for 5 GHz
• A-MPDU and A-MSDU Frame Aggregation
802.11ac
• 5.150–5.850 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0–MCS9 (6.5Mbps – 867Mbps), NSS = 1-2.
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• VHT20/VHT40/VHT80 support
• TxBF ( Transmit Beamforming)
802.11ax
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11ax Modulation (1024-QAM)
• Dual-band OFDMA
• Rates (Mbps):
• 5G: HE0-HE11 (8 Mbps – 1200 Mbps)
• 2.4G: HE0-HE11 (8 Mbps – 574 Mbps)
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• HE20/HE40/HE80 support for 5 GHz
• HE20/HE40 support for 2.4 GHz
• DL SU-MIMO and MU-MIMO
• TxBF (Transmit Beamforming)
IoT Radio
• BLE Radio Bluetooth
®
Low Energy (BLE) and IEEE® 802.15.4 compliant
1
Interfaces
• (2) Autosensing 10/100/1000 Ethernet Port, RJ45
• USB3.0, Type A , 0.5A
Power Specifications
• IEEE 802.3af PoE Power
Power Options
• Power Draw: Typical: 9W, Max:11.1W (w/o USB)
Typical: 12W, Max:14W (w/ USB)
• 802.3af Power over Ethernet (PoE) capable
Gigabit Ethernet port (RJ-45 power input pins:
Wires 4,5,7,8 or 1,2,3,6)
• 802.3af Power over Ethernet injector
• PoE Out Supports 802.3af Powered Devices (PD) when
powered by 802.3at
Physical
• 6.4" x 6.4" x 1.7" (165mm x 165mm x 45mm)
• AP310i/e: 1.5 lbs (.7 kg)
Antennas
AP310i – Internal Antennas
• (2) Integrated dual band, 2.4 GHz/5 GHz omnidirectional antennas
• (2) Integrated single band, 5.1-5.8 GHz omnidirectional antennas
• (1) Integrated single band, 2.4-2.5 GHz omnidirectional antennas for BLE
1
AP310e – External Antenna
• (4) RP SMAs connectors
• (1) RP SMAs connectors for BLE
1
Mounting
• Wall, and flat tile and 15/16" wide tbar, mount included as part of AP
• Built-in slot for Kensington type locks
• 5/8" Ceiling tile protrusions on 9/16". 15/16" and 1.5" wide t-bars sold
as an accessory
• Flush ceiling tiles with 9/16". 15/16" and 1.5" wide t-bars sold as
an accessory
Environmental
• Operating: AP310i: 0 to 50°C
AP310e: -20 to 55°C
• Storage: -40 to 70°C
Environmental Discharge
• +/-8 kV (contact discharge)/ +/-15 kV (Air Discharge)
Environmental Compliance
• UL2043 – Plenum Rated
Regulatory Compliance
Product Safety Certifications
• IEC 62368/60950-1, EN 62368/60950-1, USA 62368/60950-1, AS/NZS
62368/60950.1, Intertek NTRL
• RoHS Directive 2011/65/EU
Radio Approvals
• FCC CFR 47 Part 15, Class B
• ICES-003, Class B
• FCC Subpart C 15.247
• FCC Subpart E 15.407
• RSS247
• AS/NZS4268 + CISPR32
• IEC/EN 60601-1-2
• EN 62311
• EN 50385
• EN 301 489-1
Support
• Limited Lifetime Warranty WiNG
Peak Gains
Software Mode Radio 1 Radio 2 IoT Radio
Dual Band 2.4GHz – 4.5dBi 5GHz - 4.8dBi 4.7dBi
Sensor
2.4GHz - 4.5dBi
5GHz - 4.8dBi 4.7dBi
5GHz – 5.2dBi
Dual 5G 5GHz - 5.2dBi 5GHz - 4.8dBi 4.7dBi
• EN 301 489-17
• EN 55032, (Class B)
• EN 55011, (Group 1, Class B)
• EN 55024
• EN 61000-3-2
• EN 61000-3-3
• EN 300 328
• EN 301 893
• EN 50581
1
IoT Radio included for certain AP310i/e model SKUs