Specifications

3
WWW.EXTREMENETWORKS.COM
Product Specifications
Radio Specifications
Max Users
• SSID per Radio/Total: 8/16
• Users per Radio/total: 512/1024
802.11a
• 5.150–5.850 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11b
• 2.4–2.5 GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
802.11g
• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11n
• 2.4–2.5 GHz and 5.150–5.850 GHz Operating Frequency
• 802.11n Modulation
• Rates (Mbps): MCS0 - MCS15 (6.5MBps - 300Mbps)
• 2x2 Multiple-In, Multiple-Out (MIMO) Radio
• HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
• HT40 High-Throughput (HT) Support for 5 GHz
• A-MPDU and A-MSDU Frame Aggregation
802.11ac
• 5.150–5.850 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0–MCS9 (6.5Mbps – 867Mbps), NSS = 1-2.
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• VHT20/VHT40/VHT80 support
• TxBF (Transmit Beamforming)
802.11ax
• 2.4–2.5 GHz and 5.150–5.850 GHz Operating Frequency
• 802.11ax Modulation (1024-QAM)
• Dual-band OFDMA
• Rates (Mbps):
• 5G: HE0-HE11 (8 Mbps – 1200 Mbps).
• 2.4G: HE0-HE11 (8 Mbps – 574 Mbps).
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• HE20/HE40/HE80 support for 5 GHz
• HE20 support for 2.4 GHz
• DL SU-MIMO and MU-MIMO
• TxBF (Transmit Beamforming)
BLE 5 Radio Bluetooth® Low Energy (BLE)
Interfaces
• (1) Autosensing 10/100/1000 BASE-T Ethernet PoE
(Power over Ethernet 802.3af) Port
• USB2.0, Type A 5V, 0.9A
USB power <= 500 mA - 802.3af
USB power > 500 mA - 802.3at
Power Options
• Power Draw: Typical: 9.98 W; Max: 11.28 W (w/o USB)
Typical: 14.98 W; Max: 16.28 W (w/USB)
• 802.3af Power over Ethernet (PoE) capable Gigabit Ethernet port (RJ-45
power input pins: Wires 4,5,7,8 or 1,2,3,6)
• Support 802.3af/802.3at Power over Ethernet injector
Power Specifications
• IEEE 802.3af PoE Power
Physical
• AP 305C: 5.2" x 5.2" x 1.5" (133mm x 133mm x 37mm)
• AP 305CX: 5.8" x 5.8" x 1.5" (147mm x 147mm x 39mm)
• AP 305C and AP 305CX: .9 lbs (.4kg)
• TPM Chip
Antennas
AP305C - Internal Antennas
• (3) Integrated dual band 2.4/5GHz omnidirectional antennas
• (1) Integrated single band 5GHz omnidirectional antenna
AP305CX - External Antennas
• (4) external omnidirectional 2.4/5 GHz dual band antennas
(RP SMA connectors)
Mounting
• AP support 15/16 flush ceiling tile and is integrated to AP
• Wall Mount sold as an accessory
• Ceiling Tile Recessed 15/16" sold as an accessory
• Built-in slot for Kensington type locks
Environmental
• Operating: 0 to 40 °C, Storage: -40 to 70 °C
• Humidity: 10% to 95% (non-condensing)
Environmental Discharge
• +/-8 kV (contact discharge)/+/-15 kV (Air Discharge)
Environmental Compliance
• UL2043 - Plenum Rated
Regulatory Compliance
Product Safety Certifications
• IEC 62368/60950-1, EN 62368/60950-1, USA 62368/60950-1, AS/NZS
62368/60950.1
• RoHS Directive 2011/65/EU
Radio Approvals
• FCC CFR 47 Part 15, Class B
• ICES-003, Class B
• FCC Subpart C 15.247
• FCC Subpart E 15.407
• RSS247
• AS/NZS4268 + CISPR32
Power Options
• EN 55011, (Group 1, Class B)
• EN 55024
• EN 60601-1-2
• EN 61000-3-2
• EN 61000-3-3
• IEC/EN 60601-1-2,
• EN 62311
• EN 50385
• EN 301 489-1
• EN 301 489-17
• EN 55032, (Class B)
• EN 300 328
• EN 301 893
• EN 300 440
• EN 50581
Wi-Fi Alliance Certifications
Wi-Fi Alliance Certifications
Connectivity
Wi-Fi CERTIFIED 6
™
Wi-Fi CERTIFIED
™
a, b, g, n, ac
Access Passpoint
®
Optimization
WMM
®
WMM
®
– Power Save
Wi-Fi Agile Multiband
™
Security
Protected Management Frames
WPA
™
– Enterprise, Personal
WPA2
™
– Enterprise, Personal
WPA3
™
– Enterprise, Person
Peak Antenna Gain
Radio 0 Radio 1 IoT
Dual Band 2.4 Ghz 2.67dBi 5 Ghz 3.75dBi 2.7dBi
Dual 5Ghz 5 Ghz 3.97dBi 5 Ghz 3.75dBi 2.7dBi