Specifications

3
WWW.EXTREMENETWORKS.COM
Product Specifications
Radio Specifications
802.11a
• 5.150–5.850 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM Modulation)
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11b
• 2.4–2.5 GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
802.11g
• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM) Modulation
• 20 dBm (100 mW) Transmit Power
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11n
• 2.4–2.5 GHz and 5.150–5.850 GHz Operating Frequency
• 802.11n Modulation
• 2.4 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 300Mbps)
• 5 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 450Mbps)
• 2x2:2 Multiple-In, Multiple-Out (MIMO) Radio for 5 GHz
• 2x2:2 Multiple-In, Multiple-Out (MIMO) Radio for 2.4 GHz
• HT20 High-Throughput (HT) Support for both 2.4 GHz and 5 GHz
• HT40 High-Throughput (HT) Support for 5 GHz
802.11ac
• 5.150–5.850 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0–MCS9 (6.5Mbps – 867Mbps), NSS = 1-2
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• 20 MHz channel
• VHT20/VHT40/VHT80 support
• TxBF ( Transmit Beamforming)
802.11ax
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11ax Modulation (1024-QAM)
• Downlink and uplink OFDMA
• 5 GHz: Rates (Mbps): HE0-HE11 (8 Mbps – 1200 Mbps).
• 2.4 GHz: Rates (Mbps): HE0-HE11 (8 Mbps – 574 Mbps).
• 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
• 20/40/80 MHz channel support for 5 GHz
• HE2020 MHz channel support for 2.4 GHz
• DL SU-MIMO and MU-MIMO
• TxBF (Transmit Beamforming)
Interfaces
• (3) 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45 PoE
• (1) 10/100/1000 Mbps auto-negotiation Power Over Ethernet
(PoE)port, RJ45
• (2) RJ45 Pass through ports
• USB 2.0, Type A , 5V/500mA
Power Consumption
• 802.3af Input: Typical 11.3W, Max 12.4W
• 802.3at Input: Typical 23.6W, Max 24.9W
• 12VDC Input: Typical: 10.9W, Max:11.6W (w/ 2.5W USB Load)
Power Options
• IEEE 802.3af/802.3at (PoE/PoE+)
• With IEEE 802.3af PoE power, AP302W will power up and the Wi-Fi
and Ethernet ports will operate in its full capacity. In this scenario, PoE
budget on the down link port is not supported
• With IEEE 802.3at PoE power, AP302W will power up and the Wi-Fi
and Ethernet ports will operate in its full capacity. In this scenario, the
available PoE budget on the downlink port is 12.5W
• Power supply 12VDC, 2.0A (sold as an accessory)
• With 12VDC input, no support for PSE power
Physical
• HxWxD: 6.9" x 4.2" x 1.1" (175mm x 105.9mm x 29.2mm)
• Weight: .95 lb/(.43 kg)
• Wallplate Bracket Weight: 0.26 lb (0.1 kg)
• Kensington Lock
Antennas
• (3) Internal omni-directional 2.4G/5G dual-band antennas
(BLE 5.1 Zigbee- IEEE 802.15.4)
• (1) Internal omni-directional 5G antenna
Mounting
• Wallplate (included with the AP)
• Desk mount (sold as an accessory)
• 20mm wallplate hosuing extention (sold as an accessory)
Environmental
• Operating: 0 to +40°C, Storage: -40 to +70°C
• Humidity: 0% to 95% (non-condensing)
Warranty
• The AP302W is covered under Extreme’s
• Universal LLW policy. For warranty details, please visit:
www.extremenetworks.com/support/policies.