Installation guide
Optional Accessories
Altitude™ 4760 Series Access Point Installation Guide
66
Optional Accessories
●
Mounting kit
●
Extension arm for mounting kit
●
IP66 outdoor rated 802.3AT power injector
●
Mounting kit for outdoor IP 66 802.3AT power injector
●
External antenna options
Basic Troubleshooting
Basic troubleshooting recommendations for the Altitude 4760 Series Access Point are listed
in the following table:
Indication Response
LEDs are not lit No power to device:
Verify 802.3at compatible source is connected via PoE
Verify AC source to PoE injector
Unit was configured with LEDs disabled
No Ethernet connectivity to the unit Verify that Ethernet data cable is properly connected to PoE
injector
No wireless connectivity to the unit Verify that antennas are installed correctly