Installation guide

Altitude 4760 Series Access Point Hardware Mounting and Installation
Altitude™ 4760 Series Access Point Installation Guide
34
Examples for using the extension arm alone, or with the mounting bracket kit for a pole
mount installation are shown below.
Wall Mounted Installations
For wall mounted installations, use only the Access Point bracket and the angle adjust
bracket sections.
CAUTION
Always mount the Altitude 4760 Series Access Point with the black gore vent facing down.
NOTE
The U-bolt and band clamps are not included in the mounting bracket kit.
NOTE
The lag bolts are not included in the mounting bracket kit.
1 With the open slot connections facing down, attach the angle adjust bracket section at
the desired mounting location using four #10/32 lag bolts.