Installation guide

LED Indicators
Altitude™ 4760 Series Access Point Installation Guide
24
Two Radio LEDs
A dual-radio model Access Point (part numbers 15794, 15795, and 15811) has the following
unique LED behavior:
WARNING!
If LED 6 remains blinking Red for longer than 10 minutes, cycle the power to the unit. If the
condition persists, contact the Extreme Networks support center.
LED 1
(Sensor)
LED 2
(2.4 GHz)
LED 3
(5 GHz)
LED 4
(GE2/WAN)
LED 5
(GE1/LAN)
LED 6
(System)
Not Used Blinking Emerald
indicates
802.11b/g/n
activity.
Solid Emerald
indicates a radio
is present but not
configured.
Blinking Amber
indicates
802.11a/n
activity.
Solid Amber
indicates a
radio is present
but not
configured.
LED Off
indicates the
port is not
connected.
Blinking Green
indicates
normal
operation.
Rapidly
blinking Yellow
indicates a
port error.
LED Off
indicates the
port is not
connected.
Blinking Green
indicates
normal
operation.
Rapidly
blinking Yellow
indicates a
port error.
Solid Red
indicates
diagnostic
mode.
Blinking Red at
1 second
interval
indicates POST
failure.
Solid White
following
diagnostic mode
indicates
booting.
Blinking Red
and White at 1
second interval
indicates “no
adoption”.
Solid White
indicates normal
operation.