Installation guide

Package Contents
Altitude™ 4760 Series Access Point Installation Guide
11
Package Contents
Carefully remove all protective packing material from around the Altitude 4760 Series
Access Point and save the container for later storage and shipping. Refer to “Altitude 4760
Series Access Point Hardware” on page 8 when verifying that all Altitude 4760 Series
Access Point hardware has been received. Record the serial numbers on the shipping
cartons and Altitude 4760 Series Access Points for warranty claims and reference during
software download procedures. When opening the shipping cartons, inspect the equipment
for damage. If you find any damaged equipment or any equipment is missing, contact
Extreme Networks Support immediately.
Each Altitude 4760 Series Access Point model number (see “Altitude 4760 Series Access
Point Hardware” on page 8) includes the following parts:
● Altitude 4760 Series Access Point
● Weatherproof RJ45 plug kit
● Altitude™ 4760 Series Access Point Installation Guide (this document)
The following items are not included with the Altitude 4760 Series Access Point models, but
can be ordered from Extreme Networks:
● Antennas
● Mounting brackets/kits
● PoE power supply and accessories
● Summit WM3000 Series controllers (if required)
The following items are not provided by Extreme Networks and can be sourced from local
hardware suppliers:
● Lightning protection unit
● Cat5E cable to connect power source
● Band clamps, lag bolts, or U-bolts
● Grounding wire