Specifications

System Configuration
Altitude 4700 Series Access Point Product Reference Guide
88
To configure access for the access point:
1 Select System Configuration > AP4700 Access from the menu tree.
2 Use the AP4700 Access field checkboxes to enable/disable the following on the Access Point’s LAN1,
LAN2 or WAN interfaces:
3 Refer to the Applet Timeout field to set an HTTPS timeout interval.
Applet HTTP (port 80) Select the LAN1, LAN2 and/or WAN checkboxes to enable
access to the access point configuration applet using a
Web browser.
Applet HTTPS (port 443) Select the LAN1, LAN2 and/or WAN checkboxes to enable
access to the access point configuration applet using a
Secure Sockets Layer (SSL) for encrypted HTTP sessions.
CLI TELNET (port 23) Select the LAN1, LAN2 and/or WAN checkboxes to enable
access to the access point CLI via the TELNET terminal
emulation TCP/IP protocol.
CLI SSH (port 22) Select the LAN1, LAN2 and/or WAN checkboxes to enable
access to the access point CLI using the SSH (Secure
Shell) protocol.
SNMP (port 161) Select the LAN1, LAN2 and/or WAN checkboxes to enable
access to the access point configuration settings from an
SNMP-capable client.
HTTP/S Timeout Disables access to the Access Point if no data activity is
detected over Applet HTTPS (port 443) after the user
defined interval. Default is 0 Mins.