Specifications

Altitude 4700 Series Access Point Product Reference Guide
626
Electrical Characteristics
The Altitude 4700 Series Access Points have the following electrical characteristics:
Radio Characteristics
This section describes the radio characteristics of the Altitude 4700 Series Access Points:
● Altitude 4710 and Altitude 4750 Radio Characteristics on page 626
Altitude 4710 and Altitude 4750 Radio Characteristics
An Altitude 4710 and Altitude 4750 has the following radio characteristics:
Table 3: Electrical Characteristics
Operating Voltage 38-54V DC
Operating Current Not to exceed 600mA @ 48VDC
Table 4: Radio Characteristics
Operating
Channels
All channels from 4920 MHz to 5825 MHz except channel 52–64
Channels 1-13 (EU), Channels 1-11 (US/Canada)
Channel 14 (2484 MHz) Japan only
Actual operating frequencies depend on regulatory
Data Rates
Supported
802.11g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps
802.11a: 6,9,12,18,24,36,48, and 54Mbps
802.11n: MCS 0-15 up to 300Mbps
Wireless Medium Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing (OFDM)
Spatial multiplexing (MIMO)
Network
Standards
802.11a, 802.11b, 802.11g, 802.3, 802.11n (Draft 2.0)
Maximum
Available
Transmit Power
Maximum available conducted transmit power per chain: 2.4Ghz: + 23 dBm
Maximum available conducted transmit power all chains: 2.4GHz: + 27.7 dBm
Maximum available conducted transmit power per chain: 5.2Ghz: + 20 dBm
Maximum available conducted transmit power all chains: 5.2GHz: + 24.7 dBm
Transmit Power
Adjustment
1 dB increments
Antenna
Configuration
2x3 or 3x3