Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
476
AP4700>admin(system.access)>set
Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout
values.
Syntax
For information on configuring access point access settings using the applet (GUI), see “Configuring
Data Access” on page 87.
set applet Defines the applet HTTP/HTTPS access parameters.
app-timeout <minutes> Sets the applet timeout. Default is 300 Mins.
sslv2 <mode> Enables/disables SSL v2 support.
cli Defines CLI Telnet access parameters. Enables/disables access from
lan and wan.
ssh Sets the CLI SSH access parameters.
auth-timout <seconds> Disables the radio interface if no data activity is detected after the
interval defined. Default is 120 seconds.
inactive-timeout <minutes> Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
snmp Sets SNMP access parameters for the AP’s LAN and WAN ports.
admin-auth Designates a RADIUS server is used in the authentication verification.
server <ip> Specifies the IP address the Remote Dial-In User Service (RADIUS)
server.
port <port#> Specifies the port on which the RADIUS server is listening. Default is
1812.
secret <pw> Defines the shared secret password for RADIUS server authentication
(up to 31 characters).
mode <mode> Enables/disables the access point message mode.
msg Defines the access point login message text (up to 511 characters).