Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
474
AP4700>admin(system.lldp)>set
Sets the LLDP configuration.
Syntax
admin(system.lldp)>set lldp-mode enable
admin(system.lldp)>set lldp-refresh 100
admin(system.lldp)>set lldp-holdtime 2
admin(system.lldp)>
For information on configuring LLDP using the applet (GUI), see “Configuring LLDP Settings” on
page 108.
set Sets the LLDP configurarion.
lldp-mode Sets AP lldp mode.
lldp-refresh Sets the LLDP Refresh Interval.
lldp-holdtime Sets the LLDP HoldTime Multiplier.