Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
470
AP4700>admin(system.aap-setup)>set
Sets access point’s Adaptive AP configuration.
Syntax
admin(system.aap-setup)>set auto-discovery enable
admin(system.aap-setup)>set ipadr 192.235.111.10
admin(system.aap-setup)>set port 1812
admin(system.aap-setup)>set passphrase mudskipper
admin(system.aap-setup)>set load-balancing enable
For information on configuring adaptive AP using the applet (GUI), see “Adaptive AP Setup” on
page 85.
For an overview of adaptive AP functionality and its implications, see “Adaptive AP Overview” on
page 605.
set auto-discovery Sets the controller auto-discovery mode (enable/disable).
ipadr Defines the controller IP address used.
name Defines the controller name for DNS lookups (up to 127 characters).
port Sets the port.
passphrase Defines the pass phrase or key for controller connection.
tunnel-to-controller Enables/disables the tunnel between controller and access point.
ac-keepalive Defines the keepalive interval.
load-balancing Enables or disables AAP load balancing.