Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
460
AP4700>admin(system)>restart
Restarts the access point access point.
Syntax
Example
admin(system)>restart
********************************WARNING***********************************
** Unsaved configuration changes will be lost when the access point is reset.
** Please be sure to save changes before resetting.
**************************************************************************
Are you sure you want to restart the AP4700?? (yes/no):
AP4700 Boot Firmware Version 4.1.0.0-xxx
Press escape key to run boot firmware ........
Power On Self Test
testing ram : pass
testing nor flash : pass
testing nand flash : pass
testing ethernet : pass
For information on restarting the access point using the applet (GUI), see “Configuring System Settings”
on page 78.
restart Restarts the access point.