Specifications

Altitude 4700 Series Access Point Product Reference Guide
449
AP4700>admin(network.router)>show
Shows the access point route table.
Syntax
Example
admin(network.router)>show rip
rip type : off
rip direction : both
rip authentication type : none
rip simple auth password : *********
rip md5 id 1 : 1
rip md5 key 1 : *********
rip md5 id 2 : 1
rip md5 key 2 : *********
admin(network.router)>show routes
----------------------------------------------------------------------------
index destination netmask gateway interface metric
----------------------------------------------------------------------------
1 192.168.2.0 255.255.255.0 0.0.0.0 lan1 0
2 192.168.1.0 255.255.255.0 0.0.0.0 lan2 0
3 192.168.0.0 255.255.255.0 0.0.0.0 lan1 0
4 192.168.24.0 255.255.255.0 0.0.0.0 wan 0
5 157.235.19.5 255.255.255.0 192.168.24.1 wan 1
Default gateway Interface: wan
For information on configuring the Router options available to the access point using the applet (GUI),
see “Configuring Router Settings” on page 186.
show rip Displays the rounter’s RIP parameters.
routes Displays connected routes.