Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
396
AP4700>admin(network.wireless.radio.802-11n[2.4 GHz])>set
Defines specific 802.11n (2.4 GHz) radio parameters.
Syntax
Example
admin(network.wireless.radio.802-11n[2.4 GHz])>set placement indoor
admin(network.wireless.radio.802-11n[2.4 GHz])>set ch-mode user
admin(network.wireless.radio.802-11n[2.4 GHz])>set channel 11
admin(network.wireless.radio.802-11n[2.4 GHz])>set power 4
admin(network.wireless.radio.802-11n[2.4 GHz])>set antenna-type 1
admin(network.wireless.radio.802-11n[2.4 GHz])>set antenna-gain 10.00
admin(network.wireless.radio.802-11n[2.4 GHz])>set rf-mode b-only
admin(network.wireless.radio.802-11n[2.4 GHz])>set rates
admin(network.wireless.radio.802-11n[2.4 GHz])>set beacon 100
set placement Defines the access point radio placement as indoors or outdoors.
ch-mode Determines how the radio channel is selected (user, auto-20 or auto-40).
channel Defines the radio channel used. Channel allowed depends on actual country of
operation.
power Defines the antenna power transmit level. Depends on radio type, channel and
country.
antenna-type Sets the numerical antenna type used with the access point (0-7). Antenna types
include: 0-Default antenna, 1-Dual band antenna, 2-Omni antenna, 3-Yagi
antenna, 4-Embedded antenna,
5-Panel antenna, 6-Patch antenna, 7-Sector antenna.
antenna-gain Sets the gain used by the selected antenna type (between 0.00 - 30.00 dBm)
rf-mode Sets the default rates for the 802.11 mode selected (b-only, g-only, n-only, b-
and-g, or
bg-and-n).
rates Sets the supported radio transmit rates.
beacon Sets the beacon interval used by the radio.
dtim Defines the DTIM interval (by index) used by the radio.
aggr Sets the radio’s aggregation.
shortgi Enables/disables a short guard interval of 40MHz.
preamble Enables/disables short preamble support for the radio (this is 2.4 GHz radio
specific).
rts Defines the RTS Threshold value for the radio.
range Sets the radio’s extended range (in miles 0-50).
qos Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for
the radio.
qbss-beacon Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
qbss-mode Enables/disables the QBSS load element.
single-antenna Enables/disables single antenna support. Enable (default setting) to decrease
sensitivity and device retries.
dynamic-chain-selection Enables/disables dynamic chain selection for the radio. For more information,
see “Dynamic Chain Selection” on page 20.
tkip-ht-compatibility Enables/disables TKIP-HT rates compatibility.
bcmc-tx-speed Sets the transmission speed to either range or throughout mode.