Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
394
AP4700>admin(network.wireless.radio.802-11n[2.4 GHz])>show
Displays specific 802.11n (2.4 GHz) radio settings.
Syntax
Example
admin(network.wireless.radio.802-11n[2.4 GHz])>show radio
Radio Setting Information
Placement : indoor
MAC Address : 00A0F8715920
Radio Type : 802.11n (2.4 GHz)
ERP Protection : Off
HT Protection Mode : Pure HT
Channel Setting : user selection
Power Level : 5 dbm (4 mW)
802.11 rate compatibility mode : B, G, and N
Beacon Interval : 100 K-usec
DTIM Interval : 10 beacon intvls
short preamble : disable
RTS Threshold : 2341 bytes
QBSS Channel Util Beacon Intervl : 10 beacon intvls
QBSS Load Element Mode : enable
Single Anetenna : disable
Dynamic Chain Selection : disable
TKIP HT rates compatibility : disable
Current BCMC-Tx-Speed for : range optimization
admin(network.wireless.radio.802-11n[2.4 GHz])>show rates
802.11 rate configuration:
Basic Rates 1 2 5.5 11
Supported Rates 1 2 5.5 6 9 11 12 18 24 36 48 54
Short Guard Interval disable
-----------------------------------------------------------------------------
MCS Index Basic/Supported 20 MHz Rate 40 MHz Rate
-----------------------------------------------------------------------------
0 Supported 6.5 Mbps 13.5 Mbps
1 Supported 13.0 Mbps 27.0 Mbps
2 Supported 19.5 Mbps 40.5 Mbps
3 Supported 26.0 Mbps 54.0 Mbps
show radio Displays specific 802.11n (2.4 GHz) radio settings.
rates Displays specific 802.11n (2.4 GHz) radio rate settings.
aggr Displays specific 802.11n (2.4 GHz) aggregation settings.
qos Displays specific 802.11n (2.4 GHz) radio WMM QoS settings.