Specifications

Altitude 4700 Series Access Point Product Reference Guide
359
AP4700>admin(network.wireless.wlan)>create
Defines the parameters of a new WLAN.
Syntax
Example
admin(network.wireless.wlan.create)>show wlan
ESS Identifier :
WLAN Name :
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
create
show wlan <number> Displays newly created WLAN and policy number.
set ess <essid> Defines the ESSID for a target WLAN.
wlan-name <name> Determines the name of this particlular WLAN (1-32).
5.0GHz <mode> Enables or disables access to the access point 5.0 GHz
radio.
2.4Ghz <mode> Enables or disables access to the access point 2.4 GHz
radio.
mesh <mode> Enables or disables the Client Bridge Mesh Backhaul
option.
hotspot <mode> Enables or disables the Hotspot mode.
max-mu <number> Defines the maximum number of MU able to operate
within the WLAN (default = 127 MUs).
idle- timeout <minutes> Sets the interval the access point uses to timeout idle
MUs from WLAN inclusion. Set between 1 -65532
minutes. Default is 30 minutes.
security <name> Sets the security policy to the WLAN (1-32).
acl <name> Sets the MU ACL policy to the WLAN (1-32).
passwd <ascii
string>
Defines a Kerberos password used if the WLAN’s security
policy uses a Kerberos server-based authentication
scheme.
no-mu-mu <mode> Enables or disables MUs associated to the same WLAN to
not communicate with each other.
sbeacon <mode> Enables or disables the AP from transmitting the ESSID in
the beacon.
bcast <mode> Enables or disables the access point from accepting
broadcast IDs from MUs. Broadcast IDs are transmitted
without security.
qos <name> The index name representing the QoS policy used with
this WLAN.
add-wlan Apply the changes to the modified WLAN and exit.
rate-limiting <mode> Enables or disables MU Rate Limiting
limit w2wl <rate
limit>
Sets the per-mu rate limit in kb (in the wired-to-wireless
direction)
limit wl2w <rate
limit>
Sets the per-mu rate limit in kb (in the wireless-to-wired
direction)